See hyperlinks below to see how his project progressed:

• First Day in the Shop
• Inletting the barrel tang and installing barrel tenons.
• Inletting the lock, lock bolts, trigger plate and tang bolt.
• Installing the butt plate
• Installing the ramrod ferrules or pipes
• Installed nosecap and the ramrod tip
• Installed toeplate and started shaping the forearm
• Shaped comb on stock and started inlaying patchbox
• Wire Inlays in the stock
• Cheek inlay installed and engraved the barrel

At this point, Brian started whiskering the stock and sanding it down.

• Staining and oiling the stock

If you like the site or have any questions, drop me a line by clicking on "Hoot" below.



(c) Copyright 2005.  All Rights Reserved.