[ Home ] [ Rifleshop ] [ Tips & Aids ] [ DVD By APV ] [ Rifling Book ] [ Over The Log Shoot ] [ Project Photo Albums ] 

[ Current Projects ] [ Apprentices ] [ Testimonials ] [ Purveyor's &  Links ]

 

 

 

BACK TO PROJECT PAGE:

Making & Installing Side Plate:

I drilled out a clearance hole for the #10 bolt in a piece of steel. Then I drew a side plate pattern on the steel. I cut out the steel and then I inletted it into the stock.

_20150506_690.JPG (44540 bytes)  _20150506_692.JPG (47298 bytes)  _20150506_693.JPG (113666 bytes)

 

Hoot AL Rifle Shop

    If you like the site or have any questions, drop me a line by clicking on "Hoot" below.

    (c) Copyright 2005.  All Rights Reserved.