Started Engraving the Inlays:

I engraved the brass inlays and then will engrave the top flat of the gun barrel. 

Although this may not period correct, I wanted to make this rifle unique and not an exact copy.  To the right are the incised lines in the stock. 

To the right you can see the two bands on the end of the nose cap and the two lines along the ram rod channel.

Engraved the Lock and the Barrel: 

Hoot AL Rifle Shop

If you like the site or have any questions, drop me a line by clicking on "Hoot" below.



(c) Copyright 2005.  All Rights Reserved.